 HomeNewsThe correct way to wear ear muffs

The correct way to wear ear muffs

2022-06-06

Anti-noise earmuff is a product that can obviously reduce noise and effectively protect the hearing of the ear. Anti-noise earmuffs are widely used in factories, airports and other places with strong noise. Ear muffs are classified into two types according to their appearance: independent anti-noise earmuffs and anti-noise earmuffs with safety helmets.

Wear method:

Pull the noise-proof earmuffs outwards and across the top of your head. Place the cups over your ears so that the soft pads of the earmuffs cover your ears and fit your head tightly. While adjusting the headband, adjust the position of the anti-noise earmuff cup up and down, so that the headband and the top of the head form a stable and comfortable match. The headband should be worn directly above the head.

Friendly reminder:

In order to obtain good protective effect, prevent noise soft mat of ear flaps should be tightly joint head, any impact wear tightness of objects, such as: (try to dial back hair), ear hair thick frames or not close to the head, on the ears of a pencil, and hats, etc., will make noise ear shields don't wear tight and thus protection performance. Do not bend or change the shape of the headband, as this will loosen the headband and cause sound leakage.

Wearing method of anti-noise earmuff for Safety Helmet:

Insert the plug on the earmuff into the standard accessory slot on the helmet and fix it in the correct position. When using the earmuff, push the metal bands inward until both sides make a "click" sound, which indicates that the earmuff has been switched from the "ready" position to the "use" position. When the earmuffs are in the "in use" position, neither the cup nor the metal band should come into contact with the edge or inner lining of the helmet as this may cause leakage.

Friendly reminder:

In order to obtain good protective effect, prevent noise soft mat of ear flaps should be tightly joint head, any impact wear tightness of objects, such as: (try to dial back hair), ear hair thick frames or not close to the head, on the ears of a pencil, and hats, etc., can make earmuffs don't wear tight and thus protection performance. Do not bend or change the shape of the metal band, as this will loosen the metal band and cause sound leakage.

Anti-noise earmuffs are replaceable with snap-on cushions and sound-absorbing foam. In order to ensure good noise reduction effect, hygiene and comfort, it is recommended to replace twice a year. The noise volume is relatively small, such as electronic processing workshop, can use anti-noise earplugs, and for the operation of large noise decibel recommended to choose anti-noise earmuffs.

Previous: People-oriented and sincere service

Next: Safety helmet ABS material and glass steel material which good?